Loading... Please wait...
  • Akoma Hound Heater Classic at Petmoods.com
  • Akoma Hound Heater Classic at Petmoods.com
  • Akoma Hound Heater Classic inside at Petmoods.com
  • Akoma Hound Heater Classic at Petmoods.com
  • Akoma Hound Heater Classic at Petmoods.com

Hound Heater Classic 110-Volt by Akoma


$14.00 (Fixed shipping cost)



Hound Heater™ Classic 110-volt by Akoma®

Comfort for Your Pet, Peace of Mind for you!

  • Designed with safety, simplicity and efficiency in mind.
  • Protect your pet from the cold! A great heating source at a more economical price.

The newly designed Hound Heater™ Classic features two great changes! It now has a four sided ventilation system that will effectively heat up to 16 cubic feet (0.453 m3). This new unit is powered by a 50,000 hour replaceable heating element, 100 watt, wire resistance element with no emitters required. The same element that has made the Hound Heater™ Furnace a huge success.

The Hound Heater™ Classic stays at about 130°F (54°C) and will heat an average size dog house the typically measures 48"L X 24"H X 24"W = approx. 16 cubic feet (122 x 61 x 61 cm = 0.453 m3).

At 0°F (-18°C) outside, the house will stay around 40 degrees°F (4.4°C). If you need to warm a larger area, two or more heaters may be installed.

Safe and easy to install. When properly installed in an upper corner of the house, it doesn't take up any laying space for your dog. The galvanized metal housing is super strong and will last for many years, unlike traditional mat heaters.


  • No assembly required
  • Safe and easy to install
  • 100 watt, 50,000 hour element
  • Full Factory Warranty
  • Four sided ventilation system 
  • Heats up to 16 cubic feet (H x L x W)
  • Galvanized metal housing
  • Made from 16 gauge powder coated steel body
  • Suspended design eliminates any debris from falling on element
  • Flip up lockable door
  • Wall mount only (not intended for floor or ceiling mounting)
  • 8 foot long (244cm), 3-prong, grounded cord
  • Features a cord strain relief to eliminate cord tension problems
  • Back plate dimensions: 7" x 7" x 3/8" depth (17.8 x 17.8 x 0.95 cm)
  • 1 year manufacturer's warranty

Overall Dimensions of Heater: 6”H x 5.5"W x 5.5"W (15.24 x 14 x 14 cm)

Weight: 4 lbs (1.8 kg)

Power Draw: 0.75 amps

WALL MOUNT ONLY. Not intended for floor or ceiling mounting. 
Failure to mount properly could result in damage to the Heater or Dog House.

We recommend a Thermo Cube Thermostatically Controlled Outlet for the Classic Hound Heater™. Thermo Cube is a device, which, when plugged into a standard 120V AC electrical outlet, will automatically turn power on and off to any device plugged into it. This Thermo Cube will automatically turn on power when air temperature reaches approximately 35°F (1.7°C) and will turn off the power when temperature exceeds approximately 45°F (7.2°C).  The Thermo cube is NOT necessary for the new Hound Heater™ Dog House Furnace. Warning: The Thermo Cube is not waterproof, therefore, it must be protected from exposure to the elements with a Weather-Proof Outlet box, or by being plugged into an otherwise protected outlet. A GFCI protected outlet is strongly recommended. For added security, cover with a zip lock bag to avoid shorting out.

Frequently Asked Questions:

Is there any assembly required with the Hound Heater™?
Absolutely not! Simply follow the simple mounting instructions and plug in the heater.
To determine how many cubic feet you have, you must multiply the Length x Width x Height, aka: L x W x H. An example would be: 4 ft long x 2 ft wide x 2 ft tall = 16 cubic ft. (122cm x 61cm x 61cm = 0.453 cubic m3.). Please note that you do not measure to the top of a peaked roof, average it from the base of the roof to the peak in order to calculate the cubic space. If you need assistance, please do not hesitate to contact us.
What are the differences between the Hound Heater™ Furnace and the Hound Heater™ Classic?
The new Hound Heater™ now has several differences from the previous model. First, it is powered by a replaceable, extremely long life (50,000+ hour) wire resistance element. This technology is one of the most reliable heaters in the world. Second, Akoma® has built in a 100,000 cycle, very accurate, thermostat (replaceable). No more wondering what temperature your pet’s house is.
The Hound Heater™ Classic is a basic, very efficient, heater. You can plug it in once it gets cold and leave it on. It is now powered by the same long life, wire resistance element as the Hound Heater™ Furnace but at a lower wattage (100 watts) so it won’t get the house too warm. The Classic is a great unit for cat houses as they do not care if it is 60°F or 80°F (16°C to 27°C). Another great use is for water pump houses. Know that the valves and pump will never freeze.
What size pet house can I put the new Hound Heater™ in?
The Hound Heater™ Dog House Furnace can easily heat a well insulated dog house up to 32 cubic feet (0.453 m3). To know this amount, measure Length x Width x Height. Of course there are many important factors to consider. IE: What is the outside temperature? How much insulation does your dog house have? Does the dog house have a door? The beauty of the new heater is, because it is thermostatically controlled, it can go in a small house as well. Once the pre-set temperature (medium is approximately 50°F or 10°C) has been reached it will turn off and on to keep your pet warm and dry.
Can I use a Hound Heater™ in my Igloo style house?
Absolutely! The new Hound Heater™ will mount the same as it would in a square house. (see mounting in an Igloo style house) It is important that you use nuts, bolts and washers instead of screws for mounting. It is also critical you purchase the Igloo style bracket. It comes with instructions and all the necessary nuts and bolts previously mentioned. The Hound Heater™ back stays cool so there is no problem or worry about melting the plastic.
New this year! You simply mount the Hound Heater™ Furnace to the bracket and then mount the bracket to the wall of your Igloo style house. It will also allow the Furnace to mount straight, thus heating more efficiently!
My dog really chews. Will he get shocked?
No worries here! The cord comes out the center, back of the heater. If the house is outside the kennel, they don’t have access to it. If the house is inside the kennel and you have concerns about your pet chewing the cord, you can purchase the unit with an extremely, heavy duty, stainless steel spring. This spring covers the entire length of the cord. Contact Petmoods for details.
I installed my new Hound Heater™ Dog House furnace but the house is not warming up?
The answer is always quite simple. Every house should contain insulation and every house should have some kind of door. Doing this will eliminate the two kinds of heat loss that occur. One is conductive and the other is infiltration. The first one can best be described by thinking of holding a can of soda in the summer’s heat with no can cooler. How long would the soda stay cold? The can cooler (insulation) stops the conductive loss from your hand to the beverage. The door or flap will trap the heat. Think of how your own house would feel if you left the front door open in the winter?

We speak English - nous parlons Français - Parliamo Italiano - hablamos Español - Wir sprechen Deutsch

Hound Heater Installation

  • Hound Heater I...
Write Review

This product hasn't received any reviews yet. Be the first to review this product!